FRD Furukawa: KHP SERIES 65 - Vibratory Plate Compactor

KHP SERIES 65 - Vibratory Plate Compactor

Ideal for mini excavator and rubber-tire backhoe applications
Eliminates costly trench boxes and shoring
Drives sheeting for retaining walls
Rubber shocks absorb vibration protecting the carrier’s boom
Ft version available with O.E.M. bolt-on top cap
The TLB version is available with Kent’s patented Switch-Hitch side plate mounting system. An indexing disc inserted in the side plate can be easily changed to accommodate quick-couplers for many backhoes.
Cross-over check valve protects the motor on all Hydra-Pak models

Compaction Model	KHP 65 TLB	KHP 65 Ft II
Impulse Force lbs. (kg)	6,500 (2948)	6,500 (2948)
Cycles Per Minute	2,000	2,000
Operating Pressure PSI (BAR)	2,000 (138)	2,000 (138)
Hydraulic Flow Req'd GPM (LPM)	16 (61)	16 (61)
Weight lbs. (kg)*	840 (381)	832 (377)
Height in Inches (mm)*	27.5 (699)	22 (559)
Width in Inches (mm)	24 (610)	24 (610)
Pin Spacing in Inches (mm)	Variable	O.E.M.
Mounting Pin Diameter	As required	As required
Base Plate Dimensions in Inches (WxL) (mm)	24 x 34 (610 x 864)	24 x 34 (610 x 864)
Compaction Area sq. ft. (sq.m)	5.7 (.53)	5.7 (.53)
Hose Size in Inches (mm)
Pressure Line in Inches (mm)	0.75 (19)	0.75 (19)
Return Line in Inches (mm)	0.75 (19)	0.75 (19)

* Weight does not include pins and bushings for all models

or bolt-on top cap for Ft models

All Kent Hydra-Paks come complete with Kent's exclusive Pro-Pak for ease of installation. The Pro-Pak includes hose whips, mounting hardware and operating manual at no additional charge.

Kent models KHP 65 TLB include our unique SwitchHitch™ mounting system. An indexing disc inserted into the side plate can be easily adjusted to accommodate pin grabber type quick couplers for many popular backhoes. Attachment is a simple as rotating the disc to the OEM center-to-center distance, and then using a set of pins and spacer bushings to exactly match the manufacturer's configuration. There is no need for separate OEM specific mounting brackets which makes Kent's SwitchHitch™ system ideal when you need to be sure your hammer can fit a wide variety of backhoes. The TLB mounting plates are offset to increase the "tuck" for better road transport, and safer loading and unloading of the equipment.

The SwitchHitch™ mounting is also available in a bolt-on top cap version for use with the KHP 65 Ft.

RELATED LITERATURE

To view the literature on this site, you will need Adobe Acrobat Reader. Click here to download the latest version.


All Information, models, and specifications are subject to change without notice. Please contact your local Furukawa representative for the most current information.	© FRDUSA. All rights reserved.